Mean Well AC to DC Enclosed Type Industrial UHP Series UHP-2500 24V 36V 48V Switching Power Supply with Pfc

Product Description

MEAN WELL AC to DC Enclosed Type Industrial UHP Series UHP-2500 24V 36V 48V Switching Power Supply With PFC

Features:

1,Slim and Low profile (60mm)
2,Fanless and conduction-cooled design
3,Built-in active PFC function
4,-30~+70ºC working temperature·Output voltage and constant current level programmable
5,Protections:Short circuit/Overload/Over voltage /Over temperature
6,5 years warranty

Detailed Photos

Product Parameters

MODEL		UHP-2500-24	UHP-2500-36	UHP-2500-48
OUTPUT	DC VOLTAGE	24V	36V	48V
	RATED   CURRENT	104.2A	69.4A	52.1A
	RATED    POWER	2500.8W	2498.4W	2500.8W
	RIPPLE &NOISE(max.)Note.2	300mVp-p	360mVp-p	480mVp-p
	VOLTAGE    ADJ.RANGE	By built-in potentiometer,SVR
		24~28.8V	36~43.2V	48~57.6V
	VOLTAGE TOLERANCE Note.3	±1.0%	±1.0%	±1.0%
	LINE REGULATION	±0.5%	±0.5%	±0.5%
	LOAD REGULATION	±1.0%	±1.0%	±0.5%
	SETUP,RISE TIME     Note.4	1800ms,60ms/230VAC     1800ms,60ms/115VAC atfull load
	HOLD UP TIME(Typ.) Note.4	16ms/230VAC at 75%load     10ms/230VAC at full load;16ms/115VAC at 75%load 10ms/115VAC at full load
INPUT	VOLTAGE   RANGE     Note.4	90~264VAC     250~370VDC
	FREQUENCY     RANGE	47~63Hz
	POWER FACTOR(Typ.)Note.4	PF≥0.95/230VAC   PF≥0.99/115VAC at full load
	EFFICIENCY(Typ.)	95%	95.5%	96%
	AC CURRENT(Typ.)	15A/115VAC     14.3A/230VAC
	NRUSH CURRENT (Typ.	Cold start 30A/115VAC  60A/230VAC
	LEAKAGECURRENT	<0.75mA/240VAC
PROTECTION	OVERLOAD	105~115%ratedcurrent
		Protection type :Constant current limiting,shutdown O/P voltage after 5 sec.After O/P voltage falls,re-power on to recover
	OVER VOLTAGE	30~35V	45~51V	60~67V
		Protection type :Shut down O/P voltage,re-power on to recover
	OVERTEMPERATURE	Protection type:Shut down O/P voltage,recovers automatically after temperature goes down
FUNCTION	OUTPUT VOLTAGE PROGRAMMABLE(PV)Note     5	Adjustment of output voltageis allowable to50~120%of nominal outputvoltage Please refertotheFunction Manual.
	OUTPUT    CURRENT PROGRAMMABLE(PC)Note     5	Adjustment of constant current level is allowable to 20~100%of rated current. Please refer to the Function Manual.
	REMOTE ON/OFF CONTROL	Power ON:Short circuit Power OFF:Open circuit
	AUXILIARY POWER	12[email protected] tolerance±10%,ripple 150mVp-p
	DC-OKSIGNAL	The TTL signal out,PSU turn on=4.5~5.5V;PSU turn off=-0.5~0.5V.Please refer to the Function Manual.
ENVIRONMENT	WORKING TEMP.	-30~+70ºC(Refer to "Derating Curve")
	WORKING HUMIDITY	20~90%RH non-condensing
	STORAGE TEMP.,HUMIDITY	-40~+85ºC,10~95%RH non-condensing
	TEMP.COEFFICIENT	±0.03%/ºC  (0~50ºC)
	VIBRATION	10~500Hz,2G 10min./1cycle,60min.eachalongX,Y,Zaxes
SAFETY& EMC (Note.7)	SAFETY    STANDARDS	UL62368-1,Dekra seal BS EN/EN62368-1,EACTP TC004 approved
	WITHSTAND    VOLTAGE	I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.25KVAC
	ISOLATION RESISTANCE	I/P-O/P,I/P-FG,0/P-FG:100M Ohms/500VDC/25ºC170%RH
	EMC EMISSION	Parameter	Standard	Test Level/Note
		Conducted	BS EN/EN55032(CISPR32)	Class B
		Radiated	BS EN/EN55032(CISPR32)	ClassA
		Harmonic Current	BS EN/EN61000-3-2	Class A
		Voltage Flicker	BS EN/EN61000-3-3	-----
	EMC IMMUNITY	BS EN/EN55035,BS EN/EN61000-6-2
		Parameter	Standard	Test Level /Note
		ESD	BS EN/EN61000-4-2	Level3,8KVair;Level2,4KV contact
		Radiated	BS EN/EN61000-4-3	Level 3
		EFT/Burst	BS EN/EN61000-4-4	Level3
		Surge	BS EN/EN61000-6-2	2KV/Line-Line 4KV/Line-Earth
		Conducted	BS EN/EN61000-4-6	Level 3
		Magnetic Field	BS EN/EN61000-4-8	Level 4
		Voltage Dips and Interruptions	BS EN/EN61000-4-11	>95%dip 0.5 periods,30%dip 25 periods, >95%interruptions 250 periods
OTHERS	MTBF	493.9K hrs min.Telcordia SR-332(Bellcore);48.9K hrs min.MIL-HDBK-217F (25ºC)
	DIMENSION	310*140*60mm(L*W*H)
	PACKING	3.5kg;4pcs/15kg/1.76CUFT
NOTE	1.All parameters NOT specialy mentioned are measured at 230VAC input,rated load and 25ºC of ambient temperature. 2.Ripple &noise are measured at 20MHz of bandwidth by using a 12"twisted pair-wire terminated with a 0.1uf &47uf parael capacitor. 3.Tolerance :includes set up tolerance,line regulation and load regulation. 4.Derating may be needed under low input voltages.Please check the derating curve and Static characteristicsfor more details 5.PV/PC functions when users do not use SVR. 6.Output will shut down after O/P voltage is below<80%of Vset for 5 sec,re-power on to recover. 7.The power supply is considered a component which willbe instaled into a finalequipment.All he EMC tests are been executed by mounting the unit on    a1100mm*650mm metal plate with 1mm of hickness.The ina equipment must be reconfrmed that t sil mets EMC drectives.For guidance on how to    perform these EMC tests,please refer to  "EMI testing of component power supplies. " 8.The ambien temperature derating of 3.5ºC1000m with fanless models and of 5ºC1000m with fan models for operating atitude highe han 2000m(6500f) 9.Please contact MEAN WELL technical staf to confim that the product and the water-cooling system match the relevant specfications.