| Customization: | Available |
|---|---|
| Output Type: | Single |
| Warranty: | 5 Years |
|
Still deciding? Get samples of US$ 395/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| MODEL | RSP-3000-12 | RSP-3000-24 | RSP-3000-48 | |
| OUTPUT | DC VOLTAGE | 12V | 24V | 48V |
| RATED CURRENT | 200A | 125A | 62.5A | |
| CURRENT RANGE | 0~200A | 0~125A | 0~62.5A | |
| RATED POWER | 2400W | 3000W | 3000W | |
| RIPPLE&NOISE(max.)Note.2 | 150mVp-p | 150mVp-p | 200mVp-p | |
| VOLTAGE ADJ.RANGE | 10.8~13.2V | 22~28V | 43~56V | |
| VOLTAGE TOLERANCE Note.3 | ±1.0% | ±1.0% | ±1.0% | |
| LINE REGULATION | ±0.5% | ±0.5% | ±0.5% | |
| LOAD REGULATION | ±0.5% | ±0.5% | ±0.5% | |
| SETUP,RISE TIME | 1000ms,80ms at full load | |||
| HOLD UP TIME(Typ.) | 10ms at full load | |||
| INPUT | VOLTAGE RANGE | 180~264VAC 254~370VDC | ||
| FREQUENCY RANGE | 47~63Hz | |||
| POWERFACTOR(Typ.) | 0.95/230VAC at full load | |||
| EFFICIENCY(Typ.) | 87.5% | 90% | 91.5% | |
| AC CURRENT(Typ.) | 20A/180VAC 16A/230VAC | |||
| INRUSH CURRENT(Typ.) | 60A/230VAC | |||
| LEAKAGE CURRENT | <2.0mA/240VAC | |||
| PROTECTION | OVERLOAD | 100~112%rated outputpower | ||
| User adjustable continuousconstant curent limiting or constant current limiting with delay shutdown after 5 seconds,re-power on to recover | ||||
| OVER VOLTAGE | 13.8~16.8V | 28.8~33.6V | 57.6~67.2V | |
| Protection type:Shut down o/p voltage,re-power on to recover | ||||
| OVERTEMPERATURE | Shut down o/p voltage,recovers automatically after temperature goes down | |||
| FUNCTION | OUTPUT VOLTAGE PROGRAMMABLE(PV) |
2.4~13.2V | 4.8~28V | 9.6~56V |
| Please refer to theFunction Manual. | ||||
| CURRENT SHARING | Upto 9000W or(2+1)units.Please refer to the Function Manual. | |||
| AUXILIARY POWER(AUX) | [email protected](Only for Remote ON/OFF control) | |||
| REMOTE ON-OFF CONTROL | Please refer to the Function Manual | |||
| REMOTE SENSE | Compensate voltage drop on the load wiring up to 0.25V.Please refer to the Function Manual. | |||
| ALARM SIGNALOUTPUT | Power OK signal.Please refer tothe Function Manual | |||
| ENVIRONMENT | WORKING TEMP. | -20~+70ºC(Refer to "Derating Curve") | ||
| WORKING HUMIDITY | 20~90%RH non-condensing | |||
| STORAGE TEMP.,HUMIDITY | -40~+85ºC,10~95%RH non-condensing | |||
| TEMP.COEFFICIENT | ±0.05%/ºC (0~50ºC) | |||
| VIBRATION | 10~500Hz,2G 10min./1cycle,60min.each along X,Y,Z axes | |||
| SAFETY& EMC (Note 4) |
SAFETY STANDARDS | UL62368-1,CSAC22.2 No.62368-1,TUVBS EN/EN62368-1,BSMI CNS14336-1,AS/NZS62368.1,IS13252(Part1)/IEC60950-1, EACTPTC 004 approved |
||
| WITHSTANDVOLTAGE | I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC | |||
| ISOLATION RESISTANCE | I/P-O/P,I/P-FG,O/P-FG:100M Ohms/500VDC125ºC/70%RH | |||
| EMC EMISSION | Parameter | Standard | Test Level/Note | |
| Conducted | BS EN/EN55032(CISPR32) | Class B | ||
| Radiated | BS EN/EN55032(CISPR32) | Class A | ||
| HarmonicCurrent | BS EN/EN61000-3-2 | |||
| Voltage Flicker | BS EN/EN61000-3-3 | - -- | ||
| EMC IMMUNITY | BS EN/EN55035,BS EN/EN61000-6-2,BSMI CNS13438 | |||
| Parameter | Standard | Test Level/Note | ||
| ESD | BS EN/EN61000-4-2 | Level 3,8KV air;Level2,4KV contact | ||
| Radiated | BS EN/EN61000-4-3 | Level 3 | ||
| EFT/Burst | BS EN/EN61000-4-4 | Level 3 | ||
| Surge | BS EN/EN61000-4-5 | Level 3,2KV/Line-Earth;Level2,1KV/Line-Line | ||
| Conducted | BS EN/EN61000-4-6 | Level 3 | ||
| Magnetic Field | BS EN/EN61000-4-8 | Level 4 | ||
| Voltage Dips and Interruptions | BS EN/EN61000-4-11 | >95%dip0.5 periods,30%dip 25 periods, >95%interruptions 250 periods |
||
| OTHERS | MTBF | 677.3Khrs min.Telcordia SR-332(Bellcore);75.2Khrs min.MIL-HDBK-217F(25ºC) | ||
| DIMENSION | 278*177.8*63.5mm(L*W*H) | |||
| PACKING | 4Kg;4pcs/16Kg/2.04CUFT | |||
NOTE |
1.All parameters NOT specially mentioned are measured at 230VAC input,rated load and 25ºC of ambient temperature. 2.Ripple &noise are measured at 20MHz of bandwidth by using a 12"twisted pair-wire teminated with a0.1uf &47uf paralel capacitor. 3.Tolerance :includes set up tolerance,line regulation and load regulation. 4.The power supply is considered a component which wilbe instaled into a fina equipment Althe EMC tests are been executed by mourting the unit on a 720mm*360mm metal plate with 1mm of hickness.The final equipment must be re-confirmed that itsill meets EMC drectves.For guidanceon how to perform these EMC tests,please refer to "EMI testing of component power supplies. 5.The ambient temperature derating of 3.5ºC1000m with fanless modes and of 5C1000m with fan models for operatng alitude higher than 2000m(6500t) |
|||
){kind=link}