High Power Switching Power Supply Sp-15000 15000W 24V 36V 48V 60V 110V 220V AC to DC Industrial SMPS Power Supply

• Customization: Available
• Output Type: Single
• Output Power: 15000W
• Model NO.: SP-15000
• Connection Mode: Series Switching Power Supply
• Starting Mode: Self-excited Switching Power Supply
• Voltage Regulating Mode: Frequency Modulation Type
• Modulation System: PWM
• Brand: Weho
• Operating Temperature: -20 - +60ºC
• Current Sharing: Current SharingTTTTparallel Current Sharing
• AC Current: Low Than 18A
• Frequency Range: 45Hz - 65Hz
• Voltage Range: 95-190VAC(Output Current 50%),195-265VAC(Output Cu
• Power Factor: PF≧0.99/230VAC(Fully Loaded)
• Isolated Auxiliary Power Supply: 12V 0.5A
• Size: 455*345*251mm(L*W*H)
• Net Weight: 22kg
• Transport Package: Carton
• Trademark: WEHO
• Origin: Zhejiang
• HS Code: 8504401400
• Production Capacity: 500000
• Package Size: 45.50cm * 34.50cm * 25.10cm
• Package Gross Weight: 22.000kg

Product Description

High Power Switching Power Supply SP-15000 15000W 24V 36V 48V 60V 110V 220V Ac to Dc Industrial Smps Power Supply

Notice:

1,Input Voltage 95V~264V

2,Protection type: short circuit/over current/over voltage/over temperature

3,Power factor PF>0.99

4,Work efficiency up to 93%

5,485 Communication Control
 

Detailed Photos

Model		GZN1-15000-24	GZN1-15000-36	GZN1-15000-48		GZN1-15000-60	GZN1-15000-110	GZN1-15000-220
O U T P U T	DC voltage	24V	36V	48V		60V	110V	220V
	Rated current	625A	416A	312A		250A	136A	68A
	Current  range	0 -  6 2 5 A	0 - 416A	0 - 312A		0 - 250A	0 -  136A	0 - 68A
	Rated power	15000W
	Ripple &  Roise	500mV	500mV	600mV		600mV	1000mV	1500mV
	Constant current range	12 - 24V	18 - 36V	24 - 48V		30 - 60V	55 -  110V	110 - 220V
	Voltage tolerance	±1.0%
	Line  regulation	±1.0%
	Load regulation	±1.0%
	Setup  risetime	1500mS ,700mS/ 230VAC( Full  load)
I N P U T	Voltage  range	95- 190 VAC(output current 50%) , 195- 265 VAC(output current 10 0%)
	Frequency range	45Hz -  65Hz
	Power factor	PF>=0 .99/ 230VAC( Full  load)
	Efficiency( MAX)	90 %	91.5 %	92 %		92 %	92.5 %	93 %
	AC Current	<110A
	Leakage current	<3 .0mA /  240VAC
PROTECTION	Short curcuit	Enter the  constant  current  and  the voltage  is  less than  10%  of the  rated  voltage, turn  off  and  lock the  output  after  1  second,  and  resume  after  restart
	Over current	The  user  can  set  a  delay  of  5  seconds  after  the  current value  is turned  off,  and the  output  can  be restored  after  restart
	Over voltage	The  user  can  set  the  overvoltage  value  to  turn  off the  output  voltage,  and  resume  after  restart
	Over temperature	Turn  off the  output  and  automatically  recover  or  restart  after  the  temperature  drops
FUN CTI ON	Output voltage adjustment	0 -  26.4V	0 - 39.6V	0 -  52.8V		0 - 66V	0 -  121V	0 - 242V
	Output constant current adjustment	0 - 740A	0 - 500A	0 - 375A		0 - 300A	0 -  163.6A	0 - 81.8A
	485  communication	MODBUS  Communication  protocol
	Isolating auxiliary power supply	12V 0.5A         ( Need to  be customized)
	Output  remote control switch	Default power on,  high power off(5V-12V)  ( Need to be customized)
	Alarm output	Power  normal signal   ( Dry contact  <= 36 V , 0 . 1A )( Need to be customized)
ENV IRO NM ENT	Working TEMP.	-20 - +60ºC
	Working humidity	-20 -  90%  RHnon-condensing
	Storage TEMP. and humidity	-40 - +85ºC,  10 - 95%  RH   non-condensing
	Vibration	10 - 500Hz, 2G  10mins/T, X ,Y ,Zaxis 60 minutes each
SAF ETY & E MC	Isolation resistance	Input-output: 100 Mhms/500 VDC/ 25 ºC/70% RH
	Withstand voltage	I/ P-O/ P : 2KVAC  I/ P- FG:2KVAC O/ P- FG:0 . 5KVAC
OTH ERS	Dimension	455 *345 * 251mm(L*W * H)
	Net weight	22  KG
Remark	1 .  All  parameters NOT specially mentioned are measured at 23 0 VAC input,  rated load and 25 ºC of ambient temperature.     2 .  Ripple &noise are measured at 20 MHz of bandwidth by using a 12 " twisted pair-wire terminated with a 0 . 1uf &47uf parallel         capacitor.     3. Tolerance: includes set up tolerance, line regulation and load regulation.     4. If the input voltage is low, the output needs to be derated. For details, see the static characteristic diagram.     5. Length of setup time is measured at cold first start,Turning ON/OFF the power supply may lead to increase of the setup time.