| Customization: | Available |
|---|---|
| Output Type: | Single |
| Warranty: | 3 Years |
|
Still deciding? Get samples of US$ 89.8/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment methods: |
|
|---|---|
| Support payment in USD |
| Secure payments: | Every payment you make at Made-in-china.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
SDR-480-24 SDR-480-48 Mean Well 480W 24V 20A 48V 10A drive PLC industrial control PLC DIN rail series power supply
| MODEL | SDR-480-24 | SDR-480-48 | |
| OUTPUT | DC VOLTAGE | 24V | 48V |
| RATED CURRENT | 20A | 10A | |
| CURRENT RANGE | 0~20A | 0~10A | |
| RATED POWER | 480W | 480W | |
| PEAK CURRENT | 30A | 15A | |
| PEAKPOWER Note.6 | 720W (3sec.) | ||
| RIPPLE &NOISE(max.)Note.2 | 100mVp-p | 120mVp-p | |
| VOLTAGE ADJ.RANGE | 24~28V | 48~55V | |
| VOLTAGE TOLERANCE Note.3 | ±1.2% | ±1.0% | |
| LINEREGULATION | ±0.5% | ±0.5% | |
| LOAD REGULATION | ±1.0% | ±1.0% | |
| SETUP,RISE TIME | 1500ms,150ms/230VAC 3000ms,150ms/115VAC at full load | ||
| HOLD UPTIME(Typ.) | 14ms/230VAC at full load | ||
| INPUT | VOLTAGE RANGE Note.7 | 90~264VAC 127~370VDC | |
| FREQUENCY RANGE | 47~63Hz | ||
| POWER FACTOR (Typ.) | 0.94/230VAC 0.99/115VAC at full load | ||
| EFFICIENCY(Typ.) | 94% | ||
| AC CURRENT (Typ. | 5A/115VAC 2.5A/230VAC | ||
| INRUSH CURRENT(Typ.) | 40A/115VAC 80A230VAC | ||
| LEAKAGE CURRENT | <0.8mA/240VAC | ||
| PROTECTION | OVERLOAD | Normally works within 110~150%rated output power for more than 3 seconds and then shut down o/p voltage with auto-recovery | |
| >150%rated power,constant current imiting with auto-recovery within2 seconds and may cause to shut down if over 2 seconds | |||
| OVER VOLTAGE | 29~33V 56~65V | ||
| Protection type:Shut down o/p voltage with auto-recovery or re-power on to recovery | |||
| OVER TEMPERATURE | Shut down o/p voltage,recovers automatically aftertemperature goes down | ||
| FUNCTION | DC OKREALY CONTACTRATINGS(max.) | 60Vdc/0.3A,30Vdc/1A,30Vac/0.5A resistive load | |
| ENVIRONMENT | WORKING TEMP Note.5 | -25~+70ºC (Referto "Derating Curve") | |
| WORKING HUMIDITY | 20~95%RH non-condensing | ||
| STORAGE TEMP.,HUMIDITY | -40~+85ºC,10~95%RH | ||
| TEMP.COEFFICIENT | ±0.03%1ºC (0~50ºC) | ||
| VIBRATION | Component:10~500Hz,2G 10min./1cycle,60min.each along X,Y,Zaxes;Mounting:Compliance to IEC60068-2-6 | ||
| SAFETY & EMC (Note 4) |
SAFETY STANDARDS | UL508,TUVBS EN/EN62368-1,AS/NZS62368.1,EAC TPTC 004,BSMI CNS14336-1 approved;(meet BS EN/EN60204-1) | |
| WITHSTAND VOLTAGE | I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC O/P-DC OK:0.5KVAC | ||
| ISOLATION RESISTANCE | I/P-O/P,I/P-FG,O/P-FG:>100M Ohms/500VDC/25ºC/70%RH | ||
| EMC EMISSION | Compliance to BS EN/EN55032(CISPR32),BS EN/EN61204-3 Class B,BS EN/EN61000-3-2,-3,EAC TP TC 020,CNS13438 | ||
| EMC IMMUNITY | Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11,BS EN/EN55035,BS EN/EN61000-6-2(BS EN/EN50082-2), BS EN/EN61204-3,heavy industry level,EAC TP TC 020,SEMI F47 approved |
||
| OTHERS | MTBF | 964.2Khrs min.Telcordia SR-332(Bellcore);91.9Khrs min.MIL-HDBK-217F (25ºC) | |
| DIMENSION | 85.5*125.2*128.5mm (W*H*D) | ||
| PACKING | 1.6Kg;8pcs/13.8Kg/0.9CUFT | ||
| NOTE | 1.All parameters NOT specially mentioned are measured at 230VAC input,rated load and 25ºC of ambient temperature. 2.Ripple &noise are measured at 20MHz of bandwidth by using a 12"twisted pair-wire terminated with a 0.1 μF&47μF parllel capacitor 3.Tolerance :indudes set up tolerance,line regulation and load regulation. 4.The power supplyis considered a component which wil be installed into a finalequipment.The final equipment must be re-confrmed that itsill meets EMC direcives. 5.Instalation clearances:40mm on top,20mm on the bottom,5mm on the lft and ight side are recommended when loaded pemanenty with fullpower In case the adjacent device is a heat source,15mm dearance isrecommended. 6.3 seconds peak power max.and the average output power should not exceed the rate power. 7.Derating may be needed under low input voltage.Please check the derating curve for more details 8.The ambient temperature derating of 3.5ºC100m with fanless models and of5ºC1000m with fan models for perating alitude hgher han 2000m(6500) |
||
Q1:Why choose us?
A1:Original MEANWELL brand 100% original real MEANWELL brand, and have UL, CUL, CE, CB, RoHS and other certificates. The product surface has different S/N codes, you can check the code with MEANWELL company.
Q2: Do you have any MOQ limit?
A2: No MOQ, for most models we have stock 1pcs also ok. If the model not commonly used, we will quote the price and MOQ.
Q3:What about the lead time?
A3:Delivery time about 3-7 days, mass production time depends on order quantity and model.
Q4:How do you ship the goods and how long does it takes?
A4:We usually ship via DHL, UPS, FedEx or TNT. It will takes about 3-7 days to arrive. Airline and sea shipping also optional.
Q5:Do you offer guarantee for the products?
A5:Off course, 2-7 years warranty.
){kind=link}