| Customization: | Available |
|---|---|
| Output Type: | Single |
| Warranty: | 3 Years |
|
Still deciding? Get samples of US$ 103.31/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment methods: |
|
|---|---|
| Support payment in USD |
| Secure payments: | Every payment you make at Made-in-china.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Mean Well SDR-480p 480W 24V 20A 48V 10A Three Years Warranty Driver PLC Parallel DIN Rail Series Power Supply
| MODEL | SDR-480P-24 | SDR-480P-48 | |
| 0UTPUT | DC VOLTAGE | 24V | 48V |
| RATED CURRENT | 20A | 10A | |
| CURRENT RANGE | 0~20A | 0~10A | |
| RATED POWER | 480W | 480W | |
| PEAK CURRENT | 30A | 15A | |
| PEAK POWER Note.6 | 720W (3sec.) | ||
| RIPPLE &NOISE(max.)Note.2 | 100mVp-p | 120mVp-p | |
| VOLTAGE ADJ.RANGE | 24~28V | 48~55V | |
| VOLTAGE TOLERANCE Note.3 | ±1.2% | ±1.0% | |
| LINE REGULATION | ±0.5% | ±0.5% | |
| LOAD REGULATION | ±1.0% | ±1.0% | |
| SETUP,RISE TIME | 1500ms,150ms/230VAC 3000ms,150ms/115VAC at full load | ||
| HOLD UP TIME(Typ. | 14ms/230VAC at full load | ||
| INPUT | VOLTAGE RANGE Note.7 | 90~264VAC 127~370VDC | |
| FREQUENCY RANGE | 47~63Hz | ||
| POWER FACTOR(Typ.) | 0.94/230VAC 0.99/115VAC at full load | ||
| EFFICIENCY(Typ. | 94% | ||
| ACCURRENT(Typ.) | 5A/115VAC 2.5A230VAC | ||
| INRUSH CURRENT(Typ.) | 40A/115VAC 80A/230VAC | ||
| LEAKAGE CURRENT | <0.6mA/240VAC | ||
| PROTECTION | OVERLOAD | Normally works within 110~150%rated output power for more than 3seconds and then shut down o/p voltage with auto-recovery | |
| >150%rated power,constant current limitng with auto-recovery within 2 seconds and may cause to shut down if over 2 seconds | |||
| OVER VOLTAGE | 29~33V | 56~65V | |
| Protection type:Shut down o/pvoltage with auto-recovery or re-power on to recovery | |||
| OVER TEMPERATURE | 105ºC±5ºC(TSW:detect on heatsink of power switch) | ||
| Protection type:Shut down o/p voltage,recovers automatically aftertemperature goes down | |||
| FUNCTION | DC OKREALY CONTACTRATINGS(max. | 60Vdc/0.3A,30Vdc/1A,30Vac/0.5A resistive load | |
| CURRENT SHARING | Please see the Function Manual | ||
| ENVIRONMENT | WORKING TEMP. Note.5 | -25~+70ºC(Referto "Derating Curve") | |
| WORKING HUMIDITY | 20~95%RH non-condensing | ||
| STORAGE TEMP,HUMIDITY | -40~+85ºC,10~95%RH | ||
| TEMP.COEFFICIENT | ±0.03%1ºC (0~50ºC) | ||
| VIBRATION | Component:10~500Hz,2G 10min./1cycle,60min.each along X,Y,Zaxes;Mounting:Compliance to IEC60068-2-6 | ||
| SAFETY& EMC (Note 4) |
SAFETY STANDARDS | UL508,TUV BSEN/EN62368-1,AS/NZS 62368.1,EAC TP TC 004,BSMI CNS14336-1 approved | |
| WITHSTAND VOLTAGE | I/P-O/P:3KVAC /P-FG:2KVAC O/P-FG:0.5KVAC O/P-DC OK:0.5KVAC | ||
| ISOLATION RESISTANCE | I/P-O/P,I/P-FG,O/P-FG:>100M Ohms/500VDC/25ºC/70%RH | ||
| EMC EMISSION | Compliance to BS EN/EN55032(CISPR32)Class B,BS EN/EN61000-3-2,-3,EAC TP TC 020,CNS13438 | ||
| EMC IMMUNITY | Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11,BS EN/EN55035,BS EN/EN61000-6-2(BS EN/EN50082-2),BS EN/EN61204-3, heavy industry level,EAC TP TC020,SEMI F47 approved |
||
| OTHERS | MTBF | 969.8K hrs min.Telcordia SR-332(Bellcore);118.6Khrs min.MIL-HDBK-217F (25ºC) | |
| DIMENSION | 85.5*125.2*128.5mm (W*H*D) | ||
| PACKING | 1.6Kg;8pcs/13.8Kg/0.9CUFT | ||
| NOTE | 1.All parameters NOT specially mentioned are measured at 230VAC input,rated load and 25ºC of ambient temperature 2.Ripple &noise are measured at 20MHz of bandwidth by using a 12"twisted pair-wie terminated with a 0.1 μF&47μF parallel capacitor. 3.Tolerance :indudesset up tolerance,line regulation and load regulation. 4.The power supplyis considereda component which wil be installd nto a final equipment.The final equipment must be re-cofrmed thatit sillmeets EMC directives. 5.Instalation clearances:40mm on top,20mm on the bottom,5mm on the eft and right side are recommended when loaded pemanenty with fll power In case the adjacent device is a heat source,15mm dearance is recommended. 6.3 seconds peak power max.and the average output power should not exceed the rate power. 7.Derating may be needed under low input voltage.Please check the derating curve for more details 8.The ambient temperature derating of 3.5ºCAooom with fanless models and of5ºC/1000m with fan models for operating lftude higher than 2000m |
||
Q1:Why choose us?
A1:Original MEANWELL brand 100% original real MEANWELL brand, and have UL, CUL, CE, CB, RoHS and other certificates. The product surface has different S/N codes, you can check the code with MEANWELL company.
Q2: Do you have any MOQ limit?
A2: No MOQ, for most models we have stock 1pcs also ok. If the model not commonly used, we will quote the price and MOQ.
Q3:What about the lead time?
A3:Delivery time about 3-7 days, mass production time depends on order quantity and model.
Q4:How do you ship the goods and how long does it takes?
A4:We usually ship via DHL, UPS, FedEx or TNT. It will takes about 3-7 days to arrive. Airline and sea shipping also optional.
Q5:Do you offer guarantee for the products?
A5:Off course, 2-7 years warranty.
){kind=link}