STS is an escrow service that protects both buyers and suppliers. Funds are held securely by Made-in-China.com until order terms (e.g., delivery, quality) are fulfilled
|
Still deciding? Get samples of $ !
Request Sample
|
| Customization: | Available |
|---|---|
| Output Type: | Single |
| Warranty: | 1 Year |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
Payment Guarantee
Platform-protected payments with refund support for eligible order issues.
Platform Logistics
Inspection Service
After-Sales & Dispute Handling
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Notice:
1,Input Voltage 90V~264V
2,Protection type: short circuit/over current/over voltage/over temperature
3,Power factor PF>0.99
4,Work efficiency up to 93%
5,485 Communication Control
| Model | SP-12000-24 | SP-12000-36 | SP-12000-48 | SP-12000-60 | SP-12000-110 | SP-12000-220 | ||||
| Output | DC voltage | 24V | 36V | 48V | 60V | 110V | 220V | |||
| Rated current | 500A | 333.3A | 250A | 200A | 109A | 54.5A | ||||
| Current range | 0 - 500A | 0 - 333.3A | 0 - 250A | 0 - 200A | 0 - 109A | 0 - 54.5A | ||||
| Rated Power | 12000W | |||||||||
| Ripple | 500mV | 500mV | 600mV | 600mV | 1000mV | 1500mV | ||||
| Constant current optimum range | 12 - 24V | 18 - 36V | 24 - 48V | 30 - 60V | 55 - 110V | 110 - 220V | ||||
| Rated voltage accuracy | ± 1.0% | |||||||||
| Line Regulation | ± 1.0% | |||||||||
| Load Regulation | ± 1.0% | |||||||||
| Startup & Rise Time | 1500mS,700mS/230VAC(Fully loaded) | |||||||||
| Input | Voltage range | 95-190VAC(Output Current 50%),195-265VAC(Output Current 100%) | ||||||||
| Frequency range | 45Hz - 65Hz | |||||||||
| Power Factor | PF>=0.99/230VAC(Fully loaded) | |||||||||
| Efficiency(MAX) | 90 % | 91.5 % | 92 % | 92 % | 92.5 % | 93 % | ||||
| AC Current | <110A | |||||||||
| Leakage Current | <3.0mA / 240VAC | |||||||||
| Protect | Short Circuit | When the constant current is entered and the voltage is lower than 10% of the rated voltage, the output is shut down and locked after 1 second, and recovers after restarting. | ||||||||
| Overcurrent | The user can set the over-current value to delay the output for 5 seconds and then shut down the output, and then resume after restarting. | |||||||||
| Overpressure | Users can set the overvoltage value to shut down the output voltage, and restore after restart | |||||||||
| Over temperature | Shut down the output, automatically recover or restart after the temperature drops | |||||||||
| Function | Output voltage adjustment | 0 - 26.4V | 0 - 39.6V | 0 - 52.8V | 0 - 66V | 0 - 121V | 0 - 242V | |||
| Output constant current adjustment | 0 - 625A | 0 - 416A | 0 - 312A | 0 - 250A | 0 - 136A | 0 - 68A | ||||
| 485 Communications | MODBUS Communication Protocol | |||||||||
| Isolated auxiliary power supply | 12V 0.5A (Need customization) | |||||||||
| Output remote switch | Default power on, high level power off (5V-12V) (Need customization) | |||||||||
| Alarm signal output | Power Good Signal (Dry Contact<=36V,0.1A)(Need customization) | |||||||||
| Environment | Operating temperature | -20 - +60ºC | ||||||||
| Operating humidity | -20 - 90% RH No condensation | |||||||||
| Storage temperature and humidity | -40 - +85ºC, 10 - 95% RH No condensation | |||||||||
| Vibration resistance | 10 - 500Hz, 2G 10 Min/Cycle, X,Y,Z 60 Min | |||||||||
| Safety | Insulation resistance | Input to Output :100Mhms/500VDC/25ºC/70%RH | ||||||||
| Pressure resistance | I/P-O/P :2KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC | |||||||||
| other | Size | 455*345*251mm(L*W*H) | ||||||||
| Net Weight | 22 KG | |||||||||
| Remark | 1. All parameters are measured at 230VAC input voltage, rated load and 25ºC unless otherwise specified. 2. Ripple and noise voltage are measured with a 20MHz bandwidth oscilloscope with 0.1μ and 47μ capacitors added to the end of a 12-inch twisted pair, and measured at 20MHZ bandwidth. 3. Accuracy: includes setting error, linear regulation rate and load regulation rate. 4. Output must be derated for low input voltage conditions, please refer to the static characteristic curve for details. 5. Startup time is measured under cold start, and frequent switching may increase the startup time. |
|||||||||
Q1:Are you a factory or trading company?
A1:We are factory.
Q2:Why choose us?
A2:Our factory has been in operation for 17 years,We have enough experience to meet your needs.
Q3:How can I get the samples?
A3:You can pay for the sample this time, and we will refund the sample fee for the next batch order.
Q4:How to order?
A4:Please contact us online to send you a proforma invoice or send us your purchase order by email.
Q5:How many years warranty of your products?
A5: 1 years
){kind=link}