Sp-6000 Single Output Chassis Type AC to DC Power Supply with Pfc 6000W 24V/36V/48V/60V/220V High Power Switching Power Supply

• Customization: Available
• Output Type: Single
• Warranty: 1 Year
• Model NO.: SP-6000
• Output Power: 6000W
• Input Voltage: Full Range
• Certification: CE
• Brand: Weho
• AC Current: <56A
• Leakage Current: <3 .0mA/240VAC
• 485 Communication: Modbus Communication Protocol
• Frequency Range: 45Hz - 65Hz
• Isolating Auxiliary Power Supply: 12V 0.5A ( Need to Be Customized)
• Withstand Voltage: I/ P-O/ P : 2kvac I/ P- Fg:2kvac O/ P- Fg:0 . 5kv
• Net Weight: 9kg
• Transport Package: Carton
• Specification: 455*345*251mm
• Trademark: WEHO
• Origin: Zhejiang
• HS Code: 8504401400
• Production Capacity: 500000
• Package Size: 50.00cm * 23.00cm * 27.00cm
• Package Gross Weight: 12.000kg

Product Description

SP-6000 Single Output Chassis Type AC to DC Power Supply With PFC 6000W 24V/36V/48V/60V/220V High Power Switching Power Supply

Product Description

Notice:
1,Input Voltage 90V~264V
2,Protection type: short circuit/over current/over voltage/over temperature
3,Power factor PF>0.99
4,Work efficiency up to 93%
5,485 Communication Control

Product Parameters

Model		SP-6000-24	SP-6000-36	SP-6000-48		SP-6000-60	SP-6000-110		SP-6000-220
Output	DC voltage	24V	36V	48V		60V	110V		220V
	Rated current	250A	166.6A	125A		100A	54.5A		27.2A
	Current range	0 - 250A	0 - 166.6A	0 - 125A		0 - 100A	0 - 54.5A		0 - 27.2A
	Rated Power	6000W
	Ripple	500mV	500mV	600mV		600mV	1000mV		1500mV
	Constant current optimum range	12 - 24V	18 - 36V	24 - 48V		30 - 60V	55 - 110V		110 - 220V
	Rated voltage accuracy	± 1.0%
	Line Regulation	± 1.0%
	Load Regulation	± 1.0%
	Startup & Rise Time	1500mS,700mS/230VAC(Fully loaded)
Input	Voltage range	95-190VAC(Output Current 50%),195-265VAC(Output Current 100%)
	Frequency range	45Hz - 65Hz
	Power Factor	PF>=0.99/230VAC(Fully loaded)
	efficiency(MAX)	90 %	91.5 %	92 %		92 %	92.5 %		93 %
	Ac Current	<56A
	Leakage Current	<3.0mA / 240VAC
Protect	Short Circuit	When the constant current is entered and the voltage is lower than 10% of the rated voltage, the output is shut down and locked after 1 second, and recovers after restarting.
	Overcurrent	The user can set the over-current value to delay the output for 5 seconds and then shut down the output, and then resume after restarting.
	Overpressure	Users can set the overvoltage value to shut down the output voltage, and restore after restart
	Over temperature	Shut down the output, automatically recover or restart after the temperature drops
function	Output voltage adjustment	0 - 26.4V	0 - 39.6V	0 - 52.8V		0 - 66V	0 - 121V		0 - 242V
	Output constant current adjustment	0 - 250A	0 - 166.6A	0 - 125A		0 - 100A	0 - 54.5A		0 - 27.2A
	485 Communications	MODBUS Communication Protocol
	Isolated auxiliary power supply	12V 0.5A  (Need customization)
	Output remote switch	Default power on, high level power off   (5V-12V)  (Need customization)
	Alarm signal output	Power Good Signal (Dry Contact<= 36V,0.1A)(Need customization)
environment	Operating temperature	-20 - +60ºC
	Operating humidity	-20 - 90% RH No condensation
	Storage temperature and humidity	-40 - +85ºC, 10 - 95% RH No condensation
	Vibration resistance	10 - 500Hz, 2G 10 Min/Cycle, X,Y,Z  60 Min
Safety regulations	Insulation resistance	Input to Output:100Mhms/500VDC/25ºC/70%RH
	Pressure resistance	I/P-O/P :2KVAC I/P-FG :2KVAC O/P-FG :0.5KVAC
Other	Size	432*179*242mm(L*W*H)
	Net Weight	9 KG
Remark	1. All parameters are measured at 230VAC input voltage, rated load and 25ºC unless otherwise specified. 2. Ripple and noise voltage are measured with a 20MHz bandwidth oscilloscope with 0.1μ and 47μ capacitors added to the end of a 12-inch twisted pair, and measured at 20MHZ bandwidth. 3. Accuracy: includes setting error, linear regulation rate and load regulation rate. 4. Output must be derated for low input voltage conditions, please refer to the static characteristic curve for details. 5. Startup time is measured under cold start, and frequent switching may increase the startup time.

Company Profile

Packaging & Shipping

 

Application

Certifications

FAQ

Q1:Are you a factory or trading company?
A1:We are factory.

Q2:Why choose us?
A2:Our factory has been in operation for 17 years,We have enough experience to meet your needs.

Q3:How can I get the samples?
A3:You can pay for the sample this time, and we will refund the sample fee for the next batch order.

Q4:How to order?
A4:Please contact us online to send you a proforma invoice or send us your purchase order by email.

Q5:How many years warranty of your products?
A5: 1 years