Sp-18000 18000W 24V 36V 48V 60V 110V 220V 740A 500A 375A 300A 163.6A 81.8A AC to DC Industrial SMPS with Pfc Power Supply

• Customization: Available
• Output Type: Single
• Output Power: 18000W
• Model NO.: SP-18000
• Input Voltage: Full Range
• Connection Mode: Series Switching Power Supply
• Starting Mode: Self-excited Switching Power Supply
• Voltage Regulating Mode: Frequency Modulation Type
• Modulation System: PWM
• Brand: Weho
• Operating Temperature: -20 - +60℃
• Current Sharing: Current Sharingttttparallel Current Sharing
• AC Current: Low Than 18A
• Frequency Range: 45Hz - 65Hz
• Voltage Range: 95-190VAC(Output Current 50%),195-265VAC(Output Cu
• Power Factor: PF≧0.99/230VAC(Fully Loaded)
• Isolated Auxiliary Power Supply: 12V 0.5A
• Size: 455*345*251mm(L*W*H)
• Net Weight: 22kg
• Transport Package: Carton
• Trademark: WEHO
• Origin: Zhejiang
• HS Code: 8504401400
• Production Capacity: 500000
• Package Size: 45.50cm * 34.50cm * 25.10cm
• Package Gross Weight: 22.000kg

Product Description

SP-18000 18000W 24V 36V 48V 60V 110V 220V 740A 500A 375A 300A 163.6A 81.8A Ac to Dc Industrial Smps With PFC Power Supply

Notice:

1,Input Voltage 95V~264V

2,Protection type: short circuit/over current/over voltage/over temperature

3,Power factor PF>0.99

4,Work efficiency up to 93%

5,485 Communication Control

Detailed Photos

Model		GZN-18000-24		GZN-18000-36	GZN-18000-48	GZN-18000-60	GZN-18000-110	GZN-18000-220
OUTPUT	DC voltage	24V		36V	48V	60V	110V	220V
	Rated current	740A		500A	375A	300A	163.6A	81.8A
	Current  range	0 - 740A		0 - 500A	0 - 375A	0 - 300A	0 - 163.6A	0 - 81.8A
	Rated power	18000W
	Ripple &  Roise	500mV		500mV	600mV	600mV	1000mV	1500mV
	Constant current range	12 - 24V		18 - 36V	24 - 48V	30 - 60V	55 - 110V	110 - 220V
	Voltage tolerance	± 1.0%
	Line  regulation	± 1.0%
	Load regulation	± 1.0%
	Setup  risetime	1500mS,700mS/230VAC()
INPUT	Voltage  range	95-190VAC( 50%),195-265VAC( 100%)
	Frequency range	45Hz - 65Hz
	Power factor	PF>=0.99/230VAC()
	Efficiency( MAX)	90 %		91.5 %	92 %	92 %	92.5 %	93 %
	AC Current	<110A
	Leakage current	<3.0mA / 240VAC
PROTECTION	Short curcuit	Enter the  constant  current  and  the voltage  is  less than  10%  of the  rated  voltage, turn  off  and  lock the  output  after  1  second,  and  resume  after  restart
	Over current	The user can set the over-current value to delay the output for 5 seconds and then shut down the output, and then resume after restarting.
	Over voltage	Users can set the overvoltage value to shut down the output voltage, and restore after restart
	Over temperature	Shut down the output, automatically recover or restart after the temperature drops
Function	Output voltage adjustment	0 - 26.4V		0 - 39.6V	0 - 52.8V	0 - 66V	0 - 121V	0 - 242V
	Output constant current adjustment	0 - 740A		0 - 500A	0 - 375A	0 - 300A	0 - 163.6A	0 - 81.8A
	485  communication	MODBUS Communication Protocol
	Isolating auxiliary power supply	12V 0.5A  (Need customization)
	Output  remote control switch	Default power on, high level power off  (5V-12V) (Need customization)
	Alarm output	Power Good Signal (Dry Contact<=36V,0.1A)(Need customization)
ENVIRONMENT	Working TEMP.	-20 - +60ºC
	Working humidity	-20 - 90% RH No condensation
	Storage TEMP. and humidity	-40 - +85ºC, 10 - 95% RH No condensation
	Vibration	10 - 500Hz, 2G 10 Min/Cycle, X,Y,Z  60 Min
SAFETY&EMC	Isolation resistance	Input to Output:100Mhms/500VDC/25ºC/70%RH
	Withstand voltage	I/P-O/P:2KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
Other	Dimension	455*345*251mm(L*W*H)
	Net weight	22 KG
Remark	1 .  All  parameters NOT specially mentioned are measured at 23 0 VAC input,  rated load and 25 ºC of ambient temperature.   2 .  Ripple &noise are measured at 20 MHz of bandwidth by using a 12 " twisted pair-wire terminated with a 0 . 1uf &47uf parallel        capacitor.   3. Tolerance: includes set up tolerance, line regulation and load regulation.   4. If the input voltage is low, the output needs to be derated. For details, see the static characteristic diagram.   5. Length of setup time is measured at cold first start,Turning ON/OFF the power supply may lead to increase of the setup time.