| Customization: | Available |
|---|---|
| Output Type: | Single |
| Warranty: | 3 Years |
|
Still deciding? Get samples of US$ 56.12/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Mean Well Efficiency 94% 240W 24V 10A SDR-240-24 240W 48V 5A SDR-240-48 88~264VAC 124~370VDC DIN Rail Series Power Supply
| MODEL | SDR-240-24 | SDR-240-48 | |
| OUTPUT | DC VOLTAGE | 24V | 48V |
| RATED CURRENT | 10A | 5A | |
| CURRENT RANGE | 0~10A | 0~5A | |
| RATED POWER | 240W | 240W | |
| PEAK CURRENT | 15A | 7.5A | |
| PFAK POWER Note.6 | 360W(3sec.) | ||
| RIPPLE &NOISE(max.)Note.2 | 50mVp-p | 50mVp-p | |
| VOLTAGE ADJ.RANGE | 24~28V | 48~55V | |
| VOLTAGE TOLERANCE Note.3 | ±1.0% | ±1.0% | |
| LINE REGULATION | ±0.5% | ±0.5% | |
| LOAD REGULATION | ±1.0% | ±1.0% | |
| SETUP,RISE TIME | 650ms.60ms/230VAC 1300ms,60ms/115VAC at full load | ||
| HOLD UPTIME(Typ.) | 20ms/230VAC 20ms/115VAC at full load | ||
| INPUT | VOLTAGE RANGE | 88~264VAC 124~370VDC | |
| FREQUENCY RANGE | 47~63Hz | ||
| POWER FACTOR(Typ. | 0.94/230VAC 0.99/115VAC atfull load | ||
| EFFICIENCY(Typ.) Note.8 | 94% | ||
| AC CURRENT(Typ. | 2.6A/115VAC 1.3A/230VAC | ||
| INRUSH CURRENT (Typ.) | 33A/115VAC 55A/230VAC | ||
| LEAKAGE CURRENT | <1mA/240VAC | ||
| PROTECTION | OVERLOAD | Normally works within 110~150%rated output power formore than 3 seconds and then shut downo/p voltage with auto-recovery | |
| >150%rated power,constant current imiting with auto-recovery within2 seconds and may cause to shut down if over 2 seconds | |||
| OVERVOLTAGE | 29~33V | 56~65V | |
| Protection type:Shut down o/p voltage with auto-recovery | |||
| OVER TEMPERATURE | 95ºC±5ºC (TSW:detecton heatsink of power switch) | ||
| Protection type:Shut down o/p voltage,recovers automatically after temperature goes down | |||
| FUNCTION | DC OKREALY CONTACTRATINGS(max. | 60Vdc/0.3A,30Vdc/1A,30Vac/0.5A resistive load | |
| ENVIRONMENT | WORKING TEMP. Note.5 | -25~+70ºC(Refer to "Derating Curve") | |
| WORKING HUMIDITY | 20~95%RH non-condensing | ||
| STORAGE TEMP.,HUMIDITY | -40~+85ºC,10~95%RH | ||
| TEMP.COEFFICIENT | ±0.03%/ºC (0~50ºC) | ||
| VIBRATION | Component:10~500Hz,2G 10min./1cycle,60min.each along X,Y,Zaxes;Mounting:Compliance to IEC60068-2-6 | ||
| SAFETY 8 EMC (Note 4) |
SAFETY STANDARDS | UL508,TUV BS EN/EN62368-1,AS/NZS 62368.1,EAC TP TC 004 approved;(meet BS EN/EN60204-1) | |
| WITHSTAND VOLTAGE | I/P-O/P:3KVAC /P-FG:2KVAC O/P-FG:0.5KVAC O/P-DCOK:0.5KVAC | ||
| ISOLATION RESISTANCE | I/P-O/P,I/P-FG,O/P-FG:>100M Ohms/500VDC/25ºC/70%RH | ||
| EMC EMISSION | Compliance to BS EN/EN55032(CISPR32),BS EN/EN61204-3 Class B,BS EN/EN61000-3-2,-3,EAC TP TC 020 | ||
| EMC IMMUNITY | Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11,BS EN/EN55035,BS EN/EN61000-6-2(BS EN/EN50082-2), BS EN/EN61204-3,heavy industry level,EAC TP TC 020,SEMIF47 approved |
||
| OTHERS | MTBF | 1160.3K hrs min.Telcordia SR-332(Bellcore);169.3Khrs min.MIL-HDBK-217F (25ºC) | |
| DIMENSION | 63*125.2*113.5mm(W*H*D) | ||
| PACKING | 1.03Kg;12pcs/13.4Kg/1.22CUFT | ||
| NOTE | 1.All parameters NOT specially mentioned are measured at 230VAC input,rated load and 25ºC of ambient temperature 2.Ripple &noise are measured at 20MHz of bandwidth by using a 12"twisted pair-wire terminated with a 0.1 μF&47μF parallel capacitor 3.Tolerance :indudes set up tolerance,line regulation and load regulation. 4.The power supl is considered a component which wil e instaed nto a final equipment.The final equipment mustbe re-confrmed thatit sillmeets EMC directives. 5.Instalation clearances:40mm on top,20mm on the bottom,5mm on the eft andright side are recommended when loaded pemanenty with fullpower In case the adjacent device is a heat source,15mm dearanceis recommended. 6.3 seconds max,please refer to peak loading curves 7.Derating may be needed under low input voltage.Please check the derating curve for more details. 8.After 30 minutes of burn-in. 9.The ambien temperature deratng of 3.5ºC1000m with anless models and of5C/1000m with fan models for operating alitude higherthan 2000m(6500f) |
||
Q1:Why choose us?
A1:Original MEANWELL brand 100% original real MEANWELL brand, and have UL, CUL, CE, CB, RoHS and other certificates. The product surface has different S/N codes, you can check the code with MEANWELL company.
Q2: Do you have any MOQ limit?
A2: No MOQ, for most models we have stock 1pcs also ok. If the model not commonly used, we will quote the price and MOQ.
Q3:What about the lead time?
A3:Delivery time about 3-7 days, mass production time depends on order quantity and model.
Q4:How do you ship the goods and how long does it takes?
A4:We usually ship via DHL, UPS, FedEx or TNT. It will takes about 3-7 days to arrive. Airline and sea shipping also optional.
Q5:Do you offer guarantee for the products?
A5:Off course, 2-7 years warranty.
){kind=link}