|
Still deciding? Get samples of $ !
Order Sample
|
| Customization: | Available |
|---|---|
| Output Type: | Single |
| Warranty: | 5 Years |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| MODEL | UHP-1000-12 | UHP-1000-24 | UHP-1000-36 | UHP-1000-48 | |||
| OUTPUT | DC VOLTAGE | 12V | 24V | 36V | 48V | ||
| RATED CURRENT | 80A | 42A | 28A | 21A | |||
| RATED POWER | 960W | 1008W | 1008W | 1008W | |||
| RIPPLE &NOISE(max.)Note.2 | 150mVp-p | 240mVp-p | 240mVp-p | 300mVp-p | |||
| VOLTAGE ADJ.RANGE | By built-in potentiometer,SVR | ||||||
| 12~14.4V | 24~28.8V | 36~43.2V | 48~57.6V | ||||
| VOLTAGE TOLERANCE Note.3 | ±1.0% | ±1.0% | ±1.0% | ±1.0% | |||
| LINE REGULATION | ±0.5% | ±0.5% | ±0.5% | ±0.5% | |||
| LOAD REGULATION | ±0.5% | ±0.5% | ±0.5% | ±0.5% | |||
| SETUP,RISE TIME Note.4 | 1000ms,50ms/230VAC 1000ms,50ms/115VACatfull load | ||||||
| HOLD UP TIME(Typ.) | 12ms/230VAC 12ms/115VAC | ||||||
| INPUT | VOLTAGE RANGE Note.4 | 90~264VAC 250~370VDC | |||||
| FREQUENCY RANGE | 47~63Hz | ||||||
| POWER FACTOR(Typ.)Note.4 | PF≥0.95/230VAC PF≥0.99/115VAC at full load | ||||||
| EFFICIENCY(Typ.) | 94% | 95% | 95.5% | 96% | |||
| AC CURRENT(Typ.) | 10.1A/115VAC 5.3A/230VAC | ||||||
| INRUSH CURRENT (Typ.) | Cold start 20A/115VAC 40A/230VAC | ||||||
| LEAKAGECURRENT | <0.75mA/240VAC | ||||||
| PROTECTION | OVERLOAD | 105~120%rated output power | |||||
| Protection type:Constant current limiting with delay shutdown after 3 seconds,re-power on to recover | |||||||
| SHORT CIRCUIT | Protection type:Constant current limiting with delay shutdown after 3 seconds,re-power on to recover | ||||||
| OVER VOLTAGE | 14.5~16V | 29~33V | 43.5~49V | 59~66V | |||
| Protection type:Shut down O/Pvoltage,re-poweron to recover | |||||||
| OVER TEMPERATURE | Protectiontype:Shut down O/Pvoltage,recovers automatically after temperature goes down | ||||||
| FUNCTION | OUTPUTVOLTAGE PROGRAMMABLE(PV)Note 5 |
Adjustment of output voltage is allowable to 50~120%of nominal output voltage Please refer to the Function Manual. |
|||||
| OUTPUT CURRENT PROGRAMMABLE(PC)Note 5 |
Adjustmentof constantcurrent level is allowable to 20~100%of rated current. Please refer to the Function Manual |
||||||
| REMOTE ON/OFF CONTROL | Power ON:"Low"<0~0.5V or Short circuit Power OFF:"Hi">2~5V or Open circuit | ||||||
| AUXILIARY POWER | [email protected] tolerance±10%,ripple 150mVp-p | ||||||
| DC-OK SIGNAL | The TTLsignal out,PSU turn on=4.5~5.5V;PSU turn off=-0.1~0.5V.Please refer to the Function Manual. | ||||||
| ENVIRONMENT | WORKING TEMP. | -30~+70ºC(Refer to "Derating Curve") | |||||
| WORKING HUMIDITY | 20~90%RH non-condensing | ||||||
| STORAGE TEMP.,HUMIDITY | -40~+85ºC,10~95%RH non-condensing | ||||||
| TEMP.COEFFICIENT | ±0.03%/ºC (0~50ºC) | ||||||
| VIBRATION | 10~500Hz,5G 10min./1cycle,60min.each along X,Y,Zaxes | ||||||
| SAFETY& EMC (Note.6) |
SAFETY STANDARDS | UL62368-1,TUV BS EN/EN62368-1,EAC TP TC 004 approved | |||||
| WITHSTAND VOLTAGE | I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.25KVAC | ||||||
| ISOLATION RESISTANCE | I/P-O/P,I/P-FG,0/P-FG:100M Ohms/500VDC/25ºC/70%RH | ||||||
| EMC EMISSION | Parameter | Standard | Test Level /Note | ||||
| Conducted | BS EN/EN55032(CISPR32) | Class B | |||||
| Radiated | BS EN/EN55032(CISPR32) | Class B | |||||
| Harmonic Current | BS EN/EN61000-3-2 | Class A | |||||
| Voltage Flicker | BS EN/EN61000-3-3 | ||||||
| EMC IMMUNITY | BS EN/EN55035,BS EN/EN61000-6-2 | ||||||
| Parameter | Standard | TestLevel /Note | |||||
| ESD | BS EN/EN61000-4-2 | Level 3,8KVair;Level 2,4KV contact | |||||
| Radiated | BS EN/EN61000-4-3 | Level 3 | |||||
| EFT/Burst | BS EN/EN61000-4-4 | Level 3 | |||||
| Surge | BS EN/EN61000-6-2 | 2KV/Line-Line 4KV/Line-Earth | |||||
| Conducted | BS EN/EN61000-4-6 | Level3 | |||||
| Magnetic Field | BS EN/EN61000-4-8 | Level 4 | |||||
| Voltage Dips and Interruptions | BS EN/EN61000-4-11 | >95%dip 0.5 periods,30%dip 25 periods, >95%interruptions 250 periods |
|||||
| OTHERS | MTBF | 662.3Khrs min.TelcordiaSR-332(Bellcore);69.8Khrs min.MIL-HDBK-217F (25ºC) | |||||
| DIMENSION | 240*115*41mm(L*W*H) | ||||||
| PACKING | 1.74kg;8pcs/14.9kg/0.74CUFT | ||||||
| NOTE | 1.All parameters NOT specially mentioned are measured at 230VAC input,rated load and 25ºC of ambient temperature. 2.Riple &noise are measured at 20MHz of bandwidth by using a 12"twisted pair-wire terminated with a 0.1uf &47uf parallel capactor. 3.Tolerance:includes set up tolerance,line regulation and load regulation. 4.Derating may be needed under low input voltages.Please check the derating curve and Static characteristics for more details. 5.PV/PC functions when users do not use SVR. 6.The power supplyis considered a component which willbe instaed into a final equipment.AI the EMC tests are been executed by mouning the unit on a360mm*360mm metal plate with 1mm of thickness.The final equipment mustbere-confimed that t stilmeets EMC drecives.For guidance onhowto perform these EMC tests,please refer to"EMI testing of component power supplies. " 7.The ambient temperature deraing of 3.5ºC1000m with anless models and of 5ºC/1000m with fan models for operating litude higher than 2000m(6500f). |
||||||
){kind=link}