| Customization: | Available |
|---|---|
| Output Type: | Single |
| Warranty: | 3 Years |
|
Still deciding? Get samples of $ !
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| MODEL | HDR-150-12 | HDR-150-15 | HDR-150-24 | HDR-150-48 | ||||
| OUTPUT | DC VOLTAGE | 12V | 15V | 24V | 48V | |||
| RATED CURRENT | 115VAC | 10.2A | 8.55A | 5.31A | 2.72A | |||
| 230VAC | 11.3A | 9.5A | 6.25A | 3.2A | ||||
| RATED POWER | 115VAC | 122.4W | 128.3W | 127.4W | 130.6W | |||
| 230VAC | 135.6W | 142.5W | 150W | 153.6W | ||||
| RIPPLE&NOISE (max.)Note.2 | 100mVp-p | 120mVp-p | 150mVp-p | 200mVp- | ||||
| VOLTAGE ADJ.RANGE | 10.8~13.8V | 13.5~18V | 21.6~29V | 43.2~55.2V | ||||
| VOLTAGE TOLERANCE Note.3 | ±2.0% | ±1.0% | ±1.0% | ±1.0% | ||||
| LINE REGULATION | ±1.0% | ±1.0% | ±1.0% | ±1.0% | ||||
| LOAD REGULATION | ±1.0% | ±1.0% | ±1.0% | ±1.0% | ||||
| SETUP,RISE TIME | 500ms,60ms/230VAC 500ms,60ms/115VAC at full load | |||||||
| HOLD UP TIME(Typ.) | 30ms/230VAC 12ms/115VAC at full load | |||||||
| INPUT | VOLTAGE RANGE | 85~264VAC (277VAC operational) 120~370VDC (390VDCoperational) | ||||||
| FREQUENCY RANGE | 47~63Hz | |||||||
| EFFICIENCY(Typ.) | 89% | 89.5% | 90.5% | 90.5% | ||||
| AC CURRENT(Typ. | 3A/115VAC 1.6A/230VAC | |||||||
| INRUSH CURRENT (Typ. | COLD START 35A115VAC 70A/230VAC | |||||||
| PROTECTION | OVERLOAD | 105~135%rated output power | ||||||
| Hiccup mode when output voltage <50%,recovers automatically after fault condition is removed Constant current limiting within 50%~100%rated output voltage,recovers automatically after fault condition is removed |
||||||||
| OVER VOLTAGE | 14.2~16.2V | 18.8~22.5V | 30~36V | 56.5~64.8V | ||||
| Protection type:Shut down o/pvoltage,re-power on to recover | ||||||||
| ENVRONMENT | WORKING TEMP. | -30~+70ºC(Refer to "Derating Curve") | ||||||
| WORKING HUMIDITY | 20~90%RH non-condensing | |||||||
| STORAGE TEMP,HUMIDITY | -40~+85ºC,10~95%RH non-condensing | |||||||
| TEMP.COEFFICIENT | ±0.03%1ºC (0~45ºC)RH non-condensing | |||||||
| VIBRATION | 10~500Hz,2G 10min.1cycle,period for 60min.each along X,Y,Zaxes;Mounting:Compliance to IEC60068-2-6 | |||||||
| OPERATING ALTITUDE | 2000 meters (Note 4) | |||||||
| OVER VOLTAGE CATEGORY | ;According to EN62368,EN61558,EN50178,EN60664-1,EN62477-1;altitudeupto 2000 meters | |||||||
| SAFETY & EMC (Note.7) |
SAFETY STANDARDS | IEC62368-1,UL62368-1,UL61010,TUV BS EN/EN61558-2-16,BS EN/EN61558-1,EAC TPTC 004 approved; Design refer to BS EN/EN50178,TUV BS EN/EN62368-1 |
||||||
| WITHSTAND VOLTAGE | IP-O/P:4KVAC | |||||||
| ISOLATION RESISTANCE | I/P-O/P:100M Ohms/500VDC125ºC170%RH | |||||||
| EMC EMISSION | Parameter | Standard | Test Level/Note | |||||
| Conducted | BS EN/EN55032(CISPR32) | Class B | ||||||
| Radiated | BS EN/EN55032(CISPR32) | Class B (note 5) | ||||||
| Harmonic Current (Note 6) | BS EN/EN61000-3-2 | Class A | ||||||
| Voltage Flicker | BS EN/EN61000-3-3 | - |
||||||
| EMC IMMUNITY | BS EN/EN55024,BS EN/EN61000-6-2 | |||||||
| Parameter | Standard | Test Level /Note | ||||||
| ESD | BS EN/EN61000-4-2 | Level 3,8KV air;Level2,4KV contact,criteriaA | ||||||
| Radiated Susceptibility | BS EN/EN61000-4-3 | Level 3,criteriaA | ||||||
| EFT/Burest | BS EN/EN61000-4-4 | Level 3,criteria A | ||||||
| Surge | BS EN/EN61000-4-5 | Level 4,2KV/L-N,criteriaA | ||||||
| Conducted | BS EN/EN61000-4-6 | Level 3,criteriaA | ||||||
| Magnetic Field | BS EN/EN61000-4-8 | Level 4,criteriaA | ||||||
| Voltage Dips and interruptions | BS EN/EN61000-4-11 | >95%dip 0.5 periods,30%dip 25 periods, >95%interruptions 250 periods |
||||||
| OTHERS | MTBF | 3046.3K hrs min.Telcordia SR-332(Bellcore);535.9K hrs min.MIL-HDBK-217F(25ºC) | ||||||
| DIMENSION | 105*90*54.5mm(W*H*D) | |||||||
| PACKING | 0.31Kg;32pcs/11Kg/1.0CUFT | |||||||
| NOTE | 1.All parameters NOT specially mentioned are measured at 230VAC input,rated load and 25ºC of ambient temperature. 2.Ripple &noise are measured at 20MHz of bandwidth byusing a 12"twisted pair-wire terminated with a0.1μF&47μF parallel capacitor 3.Tolerance :includes setup tolerance,line regulation and load regulation. 4.The ambent temperature derating of 3.5ºC1000m withfanless modes and of5C/1000m with fan models for operating alitude higher than 2000m(6500f) 5.When theinput voltageis 230VAC,delivers EMI Class B for radiated emission for the power supy;When theinput voltage is 10VAC,deivers EMI ClassAfor radiated emission for the power supply. 6.Hamonic current test at 70%load. 7.The power supply is considered as an independent unit,but the final equipment si need to re-confim that the whole system complies with the EMC directives.For guidance on howto perform these EMC tests,please refer to "EMI testing of component power supplies. " |
|||||||
){kind=link}